工厂设计|ristrutturazione capannone

 

 

 

空间: 工厂

建筑面积:475㎡

使用面积:450㎡

业主:普通

装修预算:低

设计年份:2016

 

这次设计的空间是长达50米宽约9米的工业空间,高约5.4米左右,业主想要在这里面创立裁剪业务,通常裁剪业务是包括设计,裁剪布料,展示成品,打包产品并且批量销售于一条线服务的产业。因此空间设计内必须要考虑到办公室、招待所、设计室、展示走廊、仓库、厕所。客户的要求是设计一个明亮、宽敞、大方整洁的空间。针对这些要求,设计师从空间的特点出发,利用其高度和其长度,利用空间结构在天花板位置设计了吊坠装置,装置由60×60的方形钢管焊接组成组成一个有趣的几何图形,涂上白漆,在三条钢管下方安置了长条LED灯具,供应空间照明所用。通过这样的处理,不仅不会给空间带来压迫感,而更多的事一丝视觉冲击。另外设计中将之前入口处左边的办公室进行拆除改造成了迎接客源的形象地带,这里设计师将整个厕所和柜台联合在一起,在金属皮肤的包裹下变成了一个完整的金属盒,金属抛光的视觉效果给人的感觉是超现代,和整个空间的白色以及吊坠装置不谋而合。达到了明亮、大方、现代的视觉效果。末端的办公室采用廉价的木头结构和osb木板以及pc阳光板元素进行组装。整体空间以白色为主,保持原有的颜色。


It was a factory long 50m and wide 9m, with height of 5.4M, in the past it hosts a scarf production mill, now the customer wants to set up pronto moda here, or “fast fashion”, inside it the wor-kers are expected to design, cut, show the nal clothes, and if the order is done, they will also have to pack the clothes there.

For this reason the space design must include an of -ce, a reception, a laboratory, and exposition aisle and a toilet.

The customer wants to create a clean, bright and open space.

The project is characteri-zed by minimal and clean environment, thanks to the roof installation composed of 60x60mm hollow pipes installation painted white hanged down the roof,

the installation itself has a geometry that can bear led strip lamp and prevent the visitor’s attention from the cls roof above which is less beautiful.

Another particular element is the metallic block on the left side of the entrance, which hosts both toilet and reception, fully embodied

in the anodized alluminium skin. At the middle of the space there is a temporary of ce constructed with ple-xiglass and osb panel. The white dominates the space, which was the originary one.